Discontinuing a product breaks the cost-comparision chain. It makes it easier to increase prices or reduce quality without direct backlash. Releasing new products also makes for marketing announcements that work like advertisement (or is advertisement directly).
There might be something to this. It does seem older models of things are better than newer models of things. So it could be the drive to lower costs and increase profits are causing this, at the appliance, car, etc. level.
It doesn't explain why every couple of years I have another four or six pairs of yet another set of socks, from the same company, but with enough variation that now I have multiple different generations of CK socks that aren't pairable.
That's why I repurpose or discard all of my old socks every time I Invest in a new set. I do this about every two years. I rotate them for uniform wear. I've successfully eliminated the possibility of mismatched socks.
I’ve had this happen with the clothes I get from Patagonia. What was only a few years ago a thick plaid button down is now thin and not nearly as warm. And Patagonia still makes good stuff! But I do wonder if it’s time to start shopping around again.
I finally found a brand+model of jeans that I liked. I don’t have to buy pants/trousers often, so of course the next time I went to buy some it had been discontinued by the manufacturer. Even the “this is the closest style to that one” online recommendations had been discontinued, leaving me back at square one.
I stopped long ago buying brand jeans because there's literally none that will fit my build (fit guy with normal waist, huge upper leg, big but smaller lower leg), so I wondered if anybody did custom ones.
I've been very happy with www.madetoorderjeans.com (there are others) : get your measurements as they explain, pick the fabric you want (normal, stretch/fit, elastic; light and thin, thick, ...), make your stile, wait 2-3 weeks - for the price a brand jeans (so overall reasonable). Jeans last 3x times longer (wear patterns) and they fit me perfectly, instead of needing to have them adjusted after (expensive) purchase.
I have the same with a pair of jeans, I bought the same pair 3 times but now they start to wear down and I have been trying to find another pair but no luck.
Not sure how to fix but I do miss the Private Selection™ Belgian Chocolate Milk from Kroger. Why in the world would they discontinue such a unique excellent tasting product, it's a bit similar to the Dutch Nutricia brand.. ugh. shame..
https://www.kroger.com/p/private-selection-belgian-chocolate...
There is cost involved in supporting products for life long, moreover this assumes that the company would provide a life long support for every product it releases.
It's not about discontinuing items but about the industry incentives that seemingly go against logic making it impossible for most women to find fitting clothes.
Quotes:
"While there are no universal sizing standards, an organization called ASTM International regularly releases informal guidelines." "There are no regulations or universal sizing standards. Instead each brand is incentivized to make up its own. When size guides change — and they’re always changing — brands are not obligated to disclose updates."
> Where does my logic break down? What am I overlooking?
(1) Clothing manufacturing is a lot more complicated than sockets
(2) Generally products aren't discontinued because they're popular. So what you're describing is a lot of cost, for products that a lot of people don't care about.
(3) Even if someone did write up a spec for a t-shirt—what would you do with it?
(4) The need for standards is a lot more important for things like sockets which have multiple ends, and need to ensure that both sides work consistently, than for things like a piece of clothing where there's a single wearer at a time.
Yes it's super annoying, especially for shoes, which take a ton of effort to find.
I guess they do it to appeal to their biggest customers - people who can't resist buying way more shoes than they need. But it does seem weird for some brands that aren't exactly fashion houses, e.g. Ecco, to do it.
It must cost them a fair bit of money too. I wonder how much cheaper you could make shoes if you only designed one set and then fired all of your designers...
My solution is to just buy a few pairs when I find shoes I really like. Reduces the problem at least.
Also I've started buying Levi's jeans - really expensive but at least they have some styles that don't change.
Levi's jeans does have pretty consistent styles and has model numbers that haven't changed their main style identity for decades.
But, I swear the different factories will often produce slightly different cuts. I used to buy 517's all the same size, and depending on which country of origin they'd all just fit a bit differently. A little tighter here, a little looser here, but all for what are supposedly the same measurements. Some enough out of whack I refuse to wear them. I don't bother trying to get the exact same anymore.
But I do have to say they have definitely come closest to actually keeping things pretty much the same across time. I can't really say that for any other mass market clothing brands which don't include custom tailoring.
I also swear by Levi’s, they also have good range of sizes with a very rare combo that fits me perfectly, and they are well made. I tend to just instinctively buy a pair whenever i see they are on sale, i now have too many and haven’t bought any in a good couple of years.
Converse shoes also have styles that haven’t changed in decades, while convenient, they’ll usually only last me a year.
> It must cost them a fair bit of money too. I wonder how much cheaper you could make shoes if you only designed one set and then fired all of your designers...
Alden has been making the same models of shoes for decades but they aren’t cheap. Assembly labor and materials make up most of the cost for producing shoes, and Alden are made in the US.
I always have trouble buying shoes, most shops don’t stock my size in the first place, and sizes vary greatly across manufacturers, and even styles. Now when i find shoes that fit, i go order at least another 2 pairs online to avoid having to hunt down a new pair that fit well.
One bizarre one, i find when i find some foodstuff i like, the shop will eventually discontinue it, it seems almost personal…
This assumes there's no advancement in clothing manufacturing and design. Could you buy a 20 year old computer today and use it with a modern OS?
I believe the engineers and artisians who make the clothes you wear are also pushing the boundaries of fabric, patterns and cuts to feed an ever-famished audience looking for the 'next thing'.
Besides, they read the room - you no longer fit in those same sizes anymore!
Discontinuing a product breaks the cost-comparision chain. It makes it easier to increase prices or reduce quality without direct backlash. Releasing new products also makes for marketing announcements that work like advertisement (or is advertisement directly).
There might be something to this. It does seem older models of things are better than newer models of things. So it could be the drive to lower costs and increase profits are causing this, at the appliance, car, etc. level.
It doesn't explain why every couple of years I have another four or six pairs of yet another set of socks, from the same company, but with enough variation that now I have multiple different generations of CK socks that aren't pairable.
That's why I repurpose or discard all of my old socks every time I Invest in a new set. I do this about every two years. I rotate them for uniform wear. I've successfully eliminated the possibility of mismatched socks.
I’ve had this happen with the clothes I get from Patagonia. What was only a few years ago a thick plaid button down is now thin and not nearly as warm. And Patagonia still makes good stuff! But I do wonder if it’s time to start shopping around again.
I finally found a brand+model of jeans that I liked. I don’t have to buy pants/trousers often, so of course the next time I went to buy some it had been discontinued by the manufacturer. Even the “this is the closest style to that one” online recommendations had been discontinued, leaving me back at square one.
I stopped long ago buying brand jeans because there's literally none that will fit my build (fit guy with normal waist, huge upper leg, big but smaller lower leg), so I wondered if anybody did custom ones.
I've been very happy with www.madetoorderjeans.com (there are others) : get your measurements as they explain, pick the fabric you want (normal, stretch/fit, elastic; light and thin, thick, ...), make your stile, wait 2-3 weeks - for the price a brand jeans (so overall reasonable). Jeans last 3x times longer (wear patterns) and they fit me perfectly, instead of needing to have them adjusted after (expensive) purchase.
If you haven't already: Check eBay and maybe also set up an eBay Saved Search.
I have the same with a pair of jeans, I bought the same pair 3 times but now they start to wear down and I have been trying to find another pair but no luck.
Not sure how to fix but I do miss the Private Selection™ Belgian Chocolate Milk from Kroger. Why in the world would they discontinue such a unique excellent tasting product, it's a bit similar to the Dutch Nutricia brand.. ugh. shame.. https://www.kroger.com/p/private-selection-belgian-chocolate...
It's called having a tailor, and it is expensive (in the US)
They discontinued my freaking favorite hamburger, and nobody knows why. (Yes, I asked every branch)
There is cost involved in supporting products for life long, moreover this assumes that the company would provide a life long support for every product it releases.
Slightly related. This reminds me of this article: https://pudding.cool/2026/02/womens-sizing/
Sizing chaos (pudding.cool)
827 points by zdw 5 months ago | 435 comments
It's not about discontinuing items but about the industry incentives that seemingly go against logic making it impossible for most women to find fitting clothes.
Quotes:
"While there are no universal sizing standards, an organization called ASTM International regularly releases informal guidelines." "There are no regulations or universal sizing standards. Instead each brand is incentivized to make up its own. When size guides change — and they’re always changing — brands are not obligated to disclose updates."
Pah at least women get a decent number of sizes. Where are my Extra Medium t-shirts?
> Where does my logic break down? What am I overlooking?
(1) Clothing manufacturing is a lot more complicated than sockets
(2) Generally products aren't discontinued because they're popular. So what you're describing is a lot of cost, for products that a lot of people don't care about.
(3) Even if someone did write up a spec for a t-shirt—what would you do with it?
(4) The need for standards is a lot more important for things like sockets which have multiple ends, and need to ensure that both sides work consistently, than for things like a piece of clothing where there's a single wearer at a time.
Yes it's super annoying, especially for shoes, which take a ton of effort to find.
I guess they do it to appeal to their biggest customers - people who can't resist buying way more shoes than they need. But it does seem weird for some brands that aren't exactly fashion houses, e.g. Ecco, to do it.
It must cost them a fair bit of money too. I wonder how much cheaper you could make shoes if you only designed one set and then fired all of your designers...
My solution is to just buy a few pairs when I find shoes I really like. Reduces the problem at least.
Also I've started buying Levi's jeans - really expensive but at least they have some styles that don't change.
Levi's jeans does have pretty consistent styles and has model numbers that haven't changed their main style identity for decades.
But, I swear the different factories will often produce slightly different cuts. I used to buy 517's all the same size, and depending on which country of origin they'd all just fit a bit differently. A little tighter here, a little looser here, but all for what are supposedly the same measurements. Some enough out of whack I refuse to wear them. I don't bother trying to get the exact same anymore.
But I do have to say they have definitely come closest to actually keeping things pretty much the same across time. I can't really say that for any other mass market clothing brands which don't include custom tailoring.
I also swear by Levi’s, they also have good range of sizes with a very rare combo that fits me perfectly, and they are well made. I tend to just instinctively buy a pair whenever i see they are on sale, i now have too many and haven’t bought any in a good couple of years.
Converse shoes also have styles that haven’t changed in decades, while convenient, they’ll usually only last me a year.
> It must cost them a fair bit of money too. I wonder how much cheaper you could make shoes if you only designed one set and then fired all of your designers...
Alden has been making the same models of shoes for decades but they aren’t cheap. Assembly labor and materials make up most of the cost for producing shoes, and Alden are made in the US.
I always have trouble buying shoes, most shops don’t stock my size in the first place, and sizes vary greatly across manufacturers, and even styles. Now when i find shoes that fit, i go order at least another 2 pairs online to avoid having to hunt down a new pair that fit well.
One bizarre one, i find when i find some foodstuff i like, the shop will eventually discontinue it, it seems almost personal…
This assumes there's no advancement in clothing manufacturing and design. Could you buy a 20 year old computer today and use it with a modern OS?
I believe the engineers and artisians who make the clothes you wear are also pushing the boundaries of fabric, patterns and cuts to feed an ever-famished audience looking for the 'next thing'.
Besides, they read the room - you no longer fit in those same sizes anymore!